How To Make Hemp Earrings With Tassels

To make your hemp earrings you need the following supplies.

Hemp

Hemp Thread

Beads

Scissors

Earring Hooks

Try to start cutting before your string.

It is important to have extra-long cable node, because its length is used to bind the node and if it is not long enough, the entire project is scrapped. It is done much easier to cut off extra length when you begin to be created from scratch, so do be sure in advancesufficient length. If in doubt, go with more strings. I have learned that lesson the hard way more than once. If you tie for the first time hemp earrings you cut your cables even longer than normal. If I do something new I always think extra long cable'm just trying to secure.

To the hemp earrings, then we need to cut the hemp. First you will cut 2 pieces hemp string about a foot long.

After cutting your hemp twine hemp thread, take the ten pieces and cut with a footlong.

Take one of five of the hemp yarn and hemp string and drag it half way through the ring hook. Take the remaining hemp twine and hemp strings and pull them half way through the other hemp earring hooks. On both earrings, attach the thread and cord, with an overhand knot.

How to tie a knot macrame on hand.

Hold all the strands together form a loop, pulling the strings through the loop and pull tight.

Now we are ready to start the macrame portion of the hempEarrings. For this you need to learn how to make a tie knot and a half macrame macrame square knot. The macrame knots is using more of the thicker hemp twine. This is your knotted strings.

Making a half knots.

Take advantage of the node string, and then go across the middle strings and less than two knots rope. Next take two nodes string under the center string and tie it up and over a cable. Pull the cable end down hard knot to your half knot. To create a spiral macramePattern design. You must be a number of macrame half knot to tie.

A square knot.

A square knot is made by the first link a half knots. After you take half knots, you have to string two nodes and receives over the center strings and knots in string. Next take a node string under the center strings and then on two nodes cord. Tighten the trouble of knotted strings and customize your macrame square knot. The macrame flat pattern design is using squareNodes.

To the part of the hemp macrame earrings that you use either the flat pattern design and prefer the spiral design depending on your design. The macrame portion should be about an inch long. Finish the macrame portion with a hand knot. You can now cut off tie remaining length of the cords.

Instructions on how to make the pearl tassels.

Take the middle strings. Place a bead on the string and tie a half knot an inch fromEnd of the earring. Cut off any remaining length of knots over the hand. Repeat with each of the middle strings.

Their hemp earrings are now complete. I hope you find this guide helpful and informative. Some of the skills you learn in this tutorial will help you, others, such as hemp, hemp jewelry chains, necklaces, bracelets and anklets.